How to maintain the internal ventilation and wind speed control of the cone ball mill
In order to maintain the efficiency of the cone ball mill, it is not only necessary to clean the equipment regularly, but also to master certain wind speed control requirements and internal ventilation during use to effectively improve the efficiency of the equipment.
When the internal ventilation of the energy-saving conical ball mill is poor, a simpler solution is to add an axial fan on the top of the exhaust cylinder at the end of the mill. At the same time, seal the rotary screen and discharge chute of the mill to prevent the short circuit of the mill ventilation due to air leakage. In this way, the inside of the mill is ventilated smoothly, which also solves the problem of dust from the grinding head.
Similarly, the air lock system must also be done well, otherwise, the fan air will be directly drawn away from the discharge port, forming a ventilation short circuit, and there will be not much air in the mill. Secondly, we need to understand the wind speed inside the control equipment is also very important. Regarding the choice of wind speed in the mill, generally speaking, natural ventilation v-0.4m/s, strong ventilation v=0.7m/s. Some foreign factories believe that the wind speed v of strong ventilation should be 0.9 to 1.0 m/s. When v=0.7 m/s, the output no longer increases, so it can be considered that v=0.7 m/s is the wind speed.
Similarly, the air lock system must also be done well, otherwise, the fan air will be directly drawn away from the discharge port, forming a ventilation short circuit, and there will be not much air in the mill. Secondly, we need to understand the wind speed inside the control equipment is also very important. Regarding the choice of wind speed in the mill, generally speaking, natural ventilation v-0.4m/s, strong ventilation v=0.7m/s. Some foreign factories believe that the wind speed v of strong ventilation should be 0.9 to 1.0 m/s. When v=0.7 m/s, the output no longer increases, so it can be considered that v=0.7 m/s is the wind speed.
Under normal circumstances, we need to repair and maintain the equipment regularly. It is important to maintain ventilation inside the equipment, because it will have a great impact on the production capacity of the cone ball mill. It is also necessary to control the air volume inside the equipment within a reasonable range, which is too large or too small to meet the requirements.
Company:Xinxiang Tongjia Industrial Equipment Technology Co., Ltd.
Phone:086+18568631888
Email:info@aballmill.com
WhatsApp:086+15138925611
